You have no items in your shopping cart.

More Views

Joyetech Cuboid 150W Battery Mod

Be the first to review this product

150W / TC mod

Availability: In stock

Product code: ECIG64

* Required Fields



Cuboid Kit


Joyetech Cuboid Battery Mod, applies Variable Temperature Control system with firmware V3.0 and 150W output, having Temp-SS316 and customized TCR available now.It is powered by two replaceable 18650 cells with the new slip-open cover.Multiple colors, 0.96-inch OLED screen and the new dual-battery bar display make it more practical and attractive catering to your preference.Upgradeable firmware enables it always up-to-date. Now you can upgrade your Cuboid to 200W via VT Software.
Cuboid Kit

Standard Configuration

1 * Cuboid (No Cell)
1 * USB Cable
1 * Manual
1 * Warranty Card
Product Parameters:

Size: 42.00*28.00*91.50mm
Output mode: VT-Ti / VT-Ni / VW / VT-SS316 / TCR Mode
Output Wattage: 1W-150W
Resistance Range:
0.05Ω-1.5Ω for VT mode
0.1Ω-3.5Ω for VW / Bypass mode
Colors: Black, Silver, Grey
Cuboid Kit Parameters
150W Output and Dual Battery Bar

Cuboid uses two replaceable batteries with the new dual battery bar.
The maximum output can be reached to 150W, making it powerful and convenient.
We kindly recommend high-rate 18650 cells with rated discharge current≥25A.
Cuboid Kit Parameters
New Slip-open Cover and Battery Reverse Polarity Protection

The new slip-open cover on the bottom enables you change your battery swiftly by pulling the slider over.
With the Onboard Reverse Polarity Protection, it will protect the device from damage in the event of reverse battery installation.
Cuboid Kit Parameters
Firmware Upgradeable

Cuboid comes with the upgradeable firmware.
Having Version 3.00 for Cuboid, Temp-SS316 and TCR are available now.
Cuboid Kit Mode
New Firmware V5.14 for Cuboid

Cuboid can be upgraded via VT Software.
The new firmware V5.14 for Cuboid, making the maximum output up to 200W.
Cuboid Kit Mode
Temp-SS316 Mode

Based on the previous Temp-SS mode, we developed the new Temp-SS316 mode.
We kindly recommend you using Joyetech BF-SS316 atomizer heads (0.5ohm/1.0ohm).
Cuboid Kit Parameters
Cuboid Kit TCR Mode
Customized TCR Available

Cuboid enables you to adjust TCR values for different materials, thus further improving the accuracy of temperature control and bringing you the great taste.
There are three options (M1, M2, M3) for you to customize the TCR regarding to the material.
In power-off condition, press the fire button and the right regulator simultaneously for around 5 seconds, then you enter into the TCR set menu:
And here's the TCR Value Range for your reference:
Cuboid Kit TCR Mode
Exquisite 510 Stainless Steel Thread

Applied with 510 stainless steel thread and wide border fitting for large capacity atomizers.
Cuboid Kit

We kindly suggest you take out the cells and charge them with a separate charger.
The micro USB port is on the top of the left side. Connect it with a micro USB cable to charge or upgrade your device.
Cuboid Kit


Write Your Own Review

You're reviewing: Joyetech Cuboid 150W Battery Mod

Free Shipping USA Only
on orders over $50
10% OFF on First Order
When Sign Up for an Account
30 Days Warranty
On All Of Our Products