You have no items in your shopping cart.

Joyetech eGrip VT 30W 1500mAh TC Mod OLED Screen Starter Kit

Be the first to review this product

1500mAh / 3.6ml / VT mode

Availability: Out of stock

Product code: ECIG53



eGrip VT
Product is full in stock now!


Joyetech eGrip VT, applies with the Variable Temperature Control system, supporting VT-Ti (Titanium)/ VT-Ni (Nickel-200)/ VW mode with an OLED screen. It also boasts a 360-degree regulation ring to adjust output wattage or temperature. The compact size with multiple colors catering to your preference makes it always comfortable to hold.

Note: eGrip RBA Base doesn't work with eGrip VT.

eGrip VT

eGrip VT Parameters

Standard Configuration:

1 * eGrip Mouthpiece
1 * eGrip VT Body
1 * eGo ONE CL 1.0Ω Head
1 * eGo ONE CL-Ni Head
1 * eGo ONE CL-Ti Head
1 * Grip CL Base
1 * USB Cable
1 * Manual & Warranty Card

Product Parameters:

Size: 46.4mm*20.4mm*99.5mm
          (including mouthpiece)
Battery Capacity: 1500mAh
Output Mode: VT-Ni/VT-Ti/VW Mode
E-juice Capacity: 3.6ml
     Resistance Range:0.2-1.0ohm for VT mode
     Resistance Range:0.4-3.5ohm for VW mode

Attractive Colors, Easy Operation

Carrying six attractive colors, eGrip VT presents you with a compact design based on the previous eGrip series, which is convenient to hold and easy to vape.

eGrip VT Mode

Display Indications

The eGrip VT OLED screen shows you everything you need: the mode, ohm, temperature, watts, and battery life.

eGrip VT Mode

Demountable Structure

The vent pipe of eGrip VT can be detached from the body. Take off the mouthpiece then use the tiny tool in the box (or a coin) to unscrew the vent pipe from the top so as to clean it individually. Remember to screw all the spare parts tightly before use.

eGrip VT Mode

Variable Temperature Control

Being simple in operate and wonderful in vaping, eGrip VT applies with three modes: Ni, Ti and VW Modes. Press the fire button for three times to shift between VT-Ni/VT-Ti/VW Modes when the battery is on.

eGrip VT Mode

Under VW mode, you can adjust output wattage between 5W-30W.
Under VT mode, you can adjust temperature between 100-315℃/200-600℉.

Multi Types of Atomizer Heads for Option

With the eGrip CL base, it controls Nickel 200(Ni), Titanium (Ti) Heating Wire as well as eGo ONE CL 1.0ohm coil.

eVic VTC Mini with Tron VT Mode
eVic VTC Mini with Tron Coil eVic VTC Mini with Tron VW/Bypass Mode

Regulation of Air Inlet

Spin the adjustable screw on the side of the bottom. Contra rotate the screw will loosen the screw. The looser the screw is, the bigger the air inlet is.
eGrip VT Handhold

Liquid Filling

Push up the lid on the side of eGrip VT body, then slowly refill the liquids into the hole. And do remember to lock the cap after finishing filling.

eGrip VT Filling


eGrip VT Charging

It takes 2.5 hours to fully charge the battery via 1A wall adapter.
The battery level indicator on the OLED screen will keep flashing during charging.
When fully charged, the indicator will stop flashing and go out.


Write Your Own Review

You're reviewing: Joyetech eGrip VT 30W 1500mAh TC Mod OLED Screen Starter Kit

Free Shipping USA Only
on orders over $50
10% OFF on First Order
When Sign Up for an Account
30 Days Warranty
On All Of Our Products